Circuits in Strength Training
Strength circuits or cardio circuits: how they work and their downsides.
By Michaël Jongeau
A circuit is several exercises done back to back, with rest at the end of that sequence, then you start again. There are two kinds: the strength circuit, with reps and weights, and the cardio circuit, where each exercise lasts a set time. Here is how they work and what they are good for.
In short
A circuit works a lot of muscles in little time, with your heart rate climbing like it does during cardio. It lets you train strength and endurance in the same session, and get an effective workout when you're short on time. On the other hand, with lighter weights, it doesn't replace a standard strength workout if your main goal is strength or muscle growth.
What is a circuit?
A circuit follows the same principle as a superset, with more exercises:
- One set of the first exercise.
- Right away, the second, then the third, and so on, with no rest, just the time it takes to switch stations.
- Rest, once the last exercise is done.
- Repeat, as many times as planned.
Each pass through all the exercises is called a round. A circuit usually has three to six exercises, done for two to five rounds.
The idea is the same as with a superset: while you work on one exercise, the muscles from the others are recovering. Hence the point of switching body areas from one exercise to the next.
The strength circuit
This is the gym circuit: each exercise is done for reps, with a weight, as usual. The difference is the back-to-back flow.
An example of a circuit that works the whole body:
| Order | Exercise | Reps |
|---|---|---|
| 1 | Leg press | 12 |
| 2 | Dumbbell bench press | 10 |
| 3 | Lat pulldown | 12 |
| 4 | Stiff-leg deadlift | 10 |
| 5 | Lateral raise | 15 |
Then 1 to 2 minutes of rest, and another round, three or four times.
The order matters: by alternating lower body, a push, a pull, then lower body again, each area gets time to recover before its turn comes back. Weights are usually a little lighter than in a standard workout, because breathlessness builds up from one exercise to the next.
At home, the same principle works very well with bodyweight: squats, push-ups, lunges, pull-ups, for example. The no-equipment Full Body program can also be done as a circuit, if you want a shorter, more intense session.
The cardio circuit
Here you no longer count reps: each exercise lasts a fixed time. There are two ways to set it up.
Back to back, with no break
Each exercise often lasts 30 to 45 seconds, and you move straight on to the next one. Just like in a strength circuit, rest only comes at the end of the round.
An example of a cardio circuit, with no equipment:
| Order | Exercise | Time |
|---|---|---|
| 1 | Jumping jacks | 40 s |
| 2 | Jump squats | 40 s |
| 3 | Mountain climbers | 40 s |
| 4 | Burpees | 40 s |
| 5 | Plank | 40 s |
No break between exercises, then 1 minute of rest after the round. Four rounds make a session of about 17 minutes.
With a pause after each exercise: HIIT and Tabata
This is the HIIT format (high-intensity interval training): a short, intense effort, a short pause, then the next exercise. The most common version alternates 40 seconds of work and 20 seconds of rest.
Tabata is a shorter, more intense version: 20 seconds of work, 10 seconds of rest, usually for eight rounds, 4 minutes in all.
The same circuit as above, done 40 / 20 with 1 minute of rest after the round, makes a session of about 22 minutes over four rounds.
The pause lets you give a little more on each exercise. Without it, the session is more continuous. Either way, the goal is no longer the weight but the intensity: you try to keep the effort high from the start to the end of each interval. It is a form of interval training, closer to cardio than to strength training.
The downsides
You need several stations free
If having two stations free at once already complicates a superset, a five-exercise circuit at the gym can be a real challenge. At peak hours, it's better to build your circuit around a single pair of dumbbells, a bench or your bodyweight. At home, the constraint disappears, which is why that's where circuits are most practical.
Form breaks down with fatigue
Breathlessness and fatigue build up from one exercise to the next, and even more so in a cardio circuit, where you try to do as many reps as possible. The risk is rushing the last reps, especially on technical exercises or jumps. Better to pick simple exercises you know well, and slow down rather than do the movement badly.
Not the ideal tool for strength
With lighter weights and your heart running flat out, circuits are a poor fit for very heavy lifts (squat, deadlift, heavy bench press). If your main goal is strength or muscle growth, circuits work better alongside standard workouts than in place of them.
It's demanding
A well-run circuit rarely leaves you indifferent. As with supersets, leave yourself room to recover between sessions, and start with fewer rounds than you think.
How to do it
- Pick 3 to 6 exercises and alternate body areas: lower body, push, pull, core.
- Put the most demanding exercises first, while you're still fresh.
- Chain the exercises, with no break or with a short pause in a cardio circuit, then rest after the round: usually 1 to 3 minutes.
- Use slightly lighter weights than in a standard workout, to keep good form until the last exercise.
- In a cardio circuit, ease into it, for example 30 seconds of work and 30 seconds of rest, before moving to 40 / 20 or going with no break.
- Start with two or three rounds, and add more over the weeks.
Enjoyment matters too
Circuits have one real advantage: they go fast. No long dead time between sets, a brisk pace, a full session in 20 to 30 minutes. For many people, that's what makes training possible on weekdays, or simply more fun.
Others prefer to take their time and focus on one exercise and the weight, and that's fine too. Nothing stops you from mixing: a standard workout with a short circuit at the end, or a cardio circuit on a day when you're short on time.
Circuits in My Session
In My Session, open an exercise's options, in a session or a template, and choose "Create circuit". Pick the other exercises from the library or from the session, up to six in total. You can also start from the exercise list: select them, tap "Group", then choose the type of circuit.
There are two, as described in this article:
- The strength circuit ("Reps" type): each exercise keeps its reps and weight, and you check them off one by one, with a single rest time at the end of the round.
- The cardio circuit ("Timer" type): you give each exercise a duration, a pause between exercises if you want one, and a rest at the end of the round. Then everything runs on its own: a single timer guides you, and each exercise is checked off automatically when its time is up. For a Tabata, for example, set 20 seconds per exercise, a 10-second pause and a 10-second round rest.
Either way, the circuit shows up in a single card, round by round. You can reorder its exercises, add or remove some, and, just like a single exercise, see what you did in your previous sessions.
Michaël Jongeau
Creator of My Session, lifting for over 10 years.